Super Duplex S32760 Flange | ASTM 182 F55 | ANSI B16 5 Flange
Super Duplex S32760 Blind Flange | Super Duplex S32760 Flange Slip-On| Super Duplex S32760 Slip-On Raised Face Flange | Super Duplex S32760 Slip-On Reducing Flange | Super Duplex S32760 Weld Neck Flange | Weld Neck Reducing Flange | Flat Face Weld Neck Flange | Neck Weld Flange | Weld Neck Flange Raised Face | Weldneck Flange | Raised Face Weld Neck | Lapped Flange | Raised Face Flange | Tongue And Groove Flange | Slip Flange | Reducing Flange Weld Neck | Stainless Steel Threaded Flange | Hub Blind Flange
SORF Flange | RF Flange | Flange WN | FF Flange | RFWN Flange | SW Flange | SO Flange | BLRF Flange | Flange WNRF | LWNRF Flange | LJ Flange | FFSO Flange | Flange SOFF | Flange SWRF | NB Flange | RTJ Weld Neck Flange | FFWN Flange
Hex Tubes Inc a leading manufacturer, exporter and supplier of Super Duplex S32760 Flange (ASTM A182 / ANSI B16.5 / F55). Hex Tubes Inc offers a complete range of Super Duplex Stainless Steel (1.4501) Flange such as Super Duplex S32760 Blind Flange, Super Duplex S32760 Slip On Flange, Super Duplex S32760 Slip On Raised Face (SORF Flange), Super Duplex S32760 Slip On Flat Face Flange (SOFF Flange), Super Duplex S32760 Lap Joint Flange (LJ Flange), Super Duplex S32760 Weld Neck Flange (WN Flange), Super Duplex S32760 Weld Neck Raised Flange (WNRF Flange), Super Duplex S32760 Threaded Flange, Super Duplex S32760 Socket Weld Flange, Super Duplex S32760 Socket Weld Raised Face (SWRF) Flange, Super Duplex S32760 Raised Face Weld Neck Flange (RFWN Flange), Super Duplex S32760 Reducing Flange, Super Duplex S32760 Flat Face Flange (FF Flange), Super Duplex S32760 Flat Face Slip On (FFSO Flange), Super Duplex S32760 Flat Face Weld Neck (FFWN), Super Duplex S32760 Ring Joint Flange, Super Duplex S32760 Long Weld Neck Flange (LWNRF Flange), Super Duplex S32760 Plate Flange, Super Duplex S32760 Raised Face Flange (RF Flange), Super Duplex S32760 Orifice Flange, Super Duplex S32760 Spectacle Flange and Super Duplex S32760 Spectacle Blind Flange. We are one of the leading Super Duplex S32760 Flange Manufacturer who can weld Super Duplex S32760 Flange (A182 F55) in various sizes and dimensions. They have special quality finishing and duress for long life, high pressure, and zero defects.
All Super Duplex S32760 Flanges (UNS S32760) are offered with an NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government of India approved Laboratory. Positive Material Identification is done on all raw material procured at Hex Tubes Inc. Super Duplex S32760 (1.4501) Flange (ASTM A182 / ANSI B16.5) can be manufactured and supplied in a variety of sizes and pressure ratings to meet project specific requirements of our customers. Our Super Duplex S32760 (A182 F55) Flanges are widely supplied to many industries including boiler manufacturing, brewing tanks and desalination plants.
Super Duplex S32760 Flange F55 UNS S32760 (ASTM A182 / ANSI B16.5) are generally lower in cost, as the lower percentage of alloying element is used in the manufacturing of Super Duplex S32760 Flange. The yield strength of Super Duplex S32760 Flange is higher compared to Super Duplex S32760 austenitic flange, as a result of which users can purchase relatively lower thickness Super Duplex S32760 (A182 F55) Flange.
Hex Tubes Inc also stocks and supplies a complete range of SS Flange (ASTM A182 / ANSI B16.5) like Super Duplex S32760 Blind Flange, Super Duplex S32760 Slip On Flange, Super Duplex S32760 Lap Joint Flange (LJ Flange), Super Duplex S32760 Weld Neck Flange (WN Flange), Super Duplex S32760 Weld Neck Raised Flange (WNRF Flange), Super Duplex S32760 Threaded Flange, Super Duplex S32760 Slip On Flat Face Flange (SOFF Flange), Super Duplex S32760 Flat Face Slip On (FFSO Flange), Socket Super Duplex S32760 Weld Flange, Super Duplex S32760 Socket Weld Raised Face (SWRF) Flange, Reducing Flange, Flat Face Flange (FF Flange), Super Duplex S32760 Ring Joint Flange, Super Duplex S32760 Long Weld Neck Flange (LWNRF Flange), Super Duplex S32760 Plate Flange, Super Duplex S32760 Raised Face Flange (RF Flange), Super Duplex S32760 Raised Face Weld Neck Flange (RFWN Flange), Super Duplex S32760 Orifice Flange, Super Duplex S32760 Slip On Raised Face (SORF Flange), Super Duplex S32760 Spectacle Flange and Super Duplex S32760 Spectacle Blind Flange to complement our existing production range of Super Duplex S32760 Flanges. Super Duplex Stainless Steel (1.4501) Flange (ASTM A182 / ANSI B16.5) are used in Petro-Chemical Industry, Oil and Gas Industry, Nuclear Industry, Pulp & Paper Industry, Research & Development, Mega Projects & Defence & Development Industries.
Super Duplex S32760 (1.4501) Flange Specification:-
Specifications: ASTM A182, ASME SA182, F55 (A182 F55), ANSI B16.5, ANSI B16.47, ANSI B16.48 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings.
Dimensions : DIN, ASTM, BS and all International Standards.
Size : ½” (15 NB) to 48″ (1200NB).
Grade : EN 1.4501, UNS S32760.
Pressure Rating : Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.
Types : Super Duplex S32760 Blind Flange, Super Duplex S32760 Slip On Flange, Super Duplex S32760 Lap Joint Flange (LJ Flange), Super Duplex S32760 Weld Neck Flange (WN Flange), Super Duplex S32760 Threaded Flange, Super Duplex S32760 Socket Weld Flange, Super Duplex S32760 Socket Weld Raised Face (SWRF) Flange, Super Duplex S32760 Slip On Raised Face (SORF Flange), Super Duplex S32760 Slip On Flat Face Flange (SOFF Flange), Super Duplex S32760 Raised Face Weld Neck Flange (RFWN Flange), Super Duplex S32760 Weld Neck Raised Flange (WNRF Flange), Super Duplex S32760 Reducing Flange, Flat Face Flange (FF Flange), Super Duplex S32760 Flat Face Slip On (FFSO Flange), Super Duplex S32760 Flat Face Weld Neck (FFWN), Super Duplex S32760 Ring Joint Flange, Super Duplex S32760 Long Weld Neck Flange (LWNRF Flange), Super Duplex S32760 Plate Flange, Super Duplex S32760 Raised Face Flange (RF Flange), Super Duplex S32760 Orifice Flange, Super Duplex S32760 Spectacle Flange and Super Duplex S32760 Spectacle Blind Flange.
Our Super Duplex (UNS S32760) Flanges conforms to NACE MR0175 / ISO 15156.
Types of Super Duplex S32760 Flange
- Super Duplex S32760 Weld Neck Reducing Flange
- Super Duplex S32760 Flat Face Weld Neck Flange
- Super Duplex S32760 Neck Weld Flange
- Super Duplex S32760 Weld Neck Flange Raised Face
- Super Duplex S32760 Weld Neck Flange
- Super Duplex S32760 Raised Face Weld Neck Flange
- Super Duplex S32760 Lapped Flange
- Super Duplex S32760 Raised Face Flange
- Super Duplex S32760 Tongue And Groove Flange
- Super Duplex S32760 Slip Flange
- Super Duplex S32760 Reducing Weld Neck Flange
- Super Duplex S32760 Stainless Steel Threaded Flange
- Super Duplex S32760 Flange
- Super Duplex S32760 Hub Blind Flange
- Super Duplex S32760 Blind Flange
- Super Duplex S32760 Flange Slip-On
- Super Duplex S32760 Slip-On Raised Face Flange
- Super Duplex S32760 Slip-On Reducing Flange
- Super Duplex S32760 Socket Weld Flange
- Super Duplex S32760 Lap Joint Flange
- Super Duplex S32760 Threaded Flange
- Super Duplex S32760 Flat Face Flange
- Super Duplex S32760 Spectacle Flange
- Super Duplex S32760 Orifice Flange
- Super Duplex S32760 Long Neck Flanges
- Super Duplex S32760 Reducing Flange
Super Duplex S32760 Weld Neck Flange
Super Duplex S32760 Welding Neck Flange or Super Duplex S32760 Weldneck Flange (WN Flange) are easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting. The long tapered hub provides an important reinforcement for use in several applications involving high pressure, sub-zero and/or elevated temperatures. The smooth transition from flange thickness to pipe or fitting wall thickness affected by the taper is extremely beneficial, under conditions of repeated bending, caused by line expansion or other variable forces.
Super Duplex S32760 Slip On Flange (SO Flange)
1. Slip On flange 2. Filled weld outside 3. Filled weld inside 4. Pipe
Super Duplex S32760 Socket Weld Flange (SW Flange)
Socket Weld flanges were initially developed for use on small-size high-pressure piping. Their static strength is equal to Slip On flanges, but their fatigue strength 50% greater than double-welded Slip On flanges. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, some space must be created between flange or fitting and pipe.
Super Duplex S32760 Lap Joint Flange (LJ Flange)
1. Lap Joint flange 2. Stub End 3. Butt weld 4. Pipe or Fitting
Super Duplex S32760 Threaded Flange
Super Duplex S32760 Threaded Flange are used for special circumstances with their main advantage being that they can be attached to the pipe without welding. Sometimes a seal weld is also used in conjunction with the threaded connection. Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller pipe sizes. A threaded flange or fitting is not suitable for a pipe system with thin wall thickness because cutting threads on a pipe is not possible.
Super Duplex S32760 Blind Flange (BL Flange)
Super Duplex S32760 Flat Face Flange (FF Flange)
Super Duplex S32760 Flat Face (FF) flange has a gasket surface in the same plane as the bolting circle face. Applications using flat face flanges are frequently those in which the mating flange or flanged fitting is made from a casting. These pipe flanges are used when the counter-flanges are flat-face. They are mainly used to connect to cast iron equipment, valves, and specialties. This flat face flange has a gasket surface in the same plane as the bolting circle face. Flat face flanges are never to be bolted to a raised face flange.
Super Duplex S32760 Raised Face Flange (RF Flange)
UNS S32760 Ring Type Joint (RTJ) Flange
Super Duplex S32760 Spectacle Flange
This is a pressure retaining plate with one solid end and one open end connected with a web or tie-bar. In normal operation, the open end forms the seal between two flanges and permits normal flow of fluid through pipework. If the solid end is swung into position it effectively blanks of the pipe and halts the flow.
Super Duplex S32760 Orifice Flange
Super Duplex S32760 Long Neck Flanges
Owing to our rich industrial experience, we are offering a comprehensive range of Long Weld Neck Flanges. The professionals of our organization source these neck flanges from trusted vendors. These flanges are unique due to their simple connectivity with other pipes. Moreover, our products are extensively used in refining industries for linking purposes. Our esteemed patrons can avail these qualitative ranges of flanges from us at industry-leading prices.
Super Duplex Steel UNS S32760 Reducing Flange
Super Duplex S32760 Weld Neck Flange (WN Flange)
1. Weld Neck Flange 2. Butt Weld 3. Pipe or Fitting
Super Duplex S32760 Slip On Flange (SO Flange)
The calculated strength from a Super Duplex S32760 Slip-On flange (SO Flange) under internal pressure is of the order of two-thirds that of Welding Neck flanges, and their life under fatigue is about one-third that of the latter. The connection with the pipe is done with 2 fillet welds, as well as the outside as also at the inside of the flange. The X measure on the image is approximately Wall thickness of pipe + 3 mm. This space is necessary, to do not damage the flange face, during the welding process.
Super Duplex S32760 Socket Weld Flange (SW Flange)
1. Socket Weld flange 2. Filled weld 3. Pipe X = Expansion gap
Super Duplex S32760 Lap Joint Flange (LJ Flange)
Super Duplex S32760 Lap Joint Flange have all the same common dimensions as any other flange named on this page however it does not have a raised face, they used in conjunction with a “Lap Joint Stub End”. These Super Duplex S32760 Flanges are nearly identical to a Slip-On flange with the exception of a radius at the intersection of the flange face and the bore to accommodate the flanged portion of the Stub End. Their pressure-holding ability is little, if any, better than that of Slip-On flange and the fatigue life for the assembly is only one-tenth that of Welding Neck flanges. They may be used at all pressures and are available in a full-size range.
Super Duplex S32760 Threaded Flange
1. Threaded flange 2. Thread 3. Pipe or Fitting
Super Duplex S32760 Blind Flange (BL Flange)
Super Duplex S32760 Blind Flange are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings. From the standpoint of internal pressure and bolt loading, Super Duplex S32760 blind flange, particularly in the larger sizes, are the most highly stressed flange types. However, most of these stresses are bending types near the center, and since there is no standard inside diameter, these flanges are suitable for higher pressure-temperature applications.
Super Duplex S32760 Flat Face Flange (FF Flange)
Raised Face Flange (RF Flange)
These pipe flanges are the most commonly used flanges. The raised face thickness of 150# and 300# are included in the specified flange thickness and for the higher rating, they are not included in the flange thickness. The Raised Face (RF) type is the most applied flange face and is easy to identify. It is referred to as a raised face because the gasket surfaces are raised above the bolting circle face.
Super Duplex S32760 Ring Type Joint (RTJ) Flange
These pipe flanges are most reliable type of flange joint but are costlier than the other type of flanges. Super Duplex S32760 Ring Type Joint flange is generally used in high pressure (Class 600 and higher rating) and/or high-temperature services above 800°F (427°C). A flange is a forged or cast ring of steel designed to connect sections of pipe or join pipe to a pressure Vessel, pump or any other integral flanges assembly.
Super Duplex S32760 Spectacle Flanges
Super Duplex S32760 Orifice Flange
The function of an orifice flange is to provide access to a line for metering of gasses or liquids. An orifice plate is clamped between a pair of flanges when installing in a line and the whole assembly is referred to as an orifice flange union. Jack-screws within the assembly facilitates removal of the orifice plate. The orifice plate, the metering device, consists of a thin plate with a concentric, square edge, circular hole in the center. Two pressure tap-holes are drilled in each flange to measure pressure difference through the orifice.
Super Duplex S32760 Long Neck flanges
Super Duple S32760 Reducing Flange
Reducing Flanges are used in place of standard flanges to allow for a change in pipe size. The flange consists of one specified diameter with a smaller diameter bore size. Except for the bore and hub dimensions, a reducing flange has dimensions of the larger pipe size. Welding neck, slip-on, and threaded flanges can be reducers and are considered an economical means to make a pipe size transition. Reducing Slip On Flange, Reducing Weld Neck Flange.
- Super Duplex 2507 - Standards
- Super Duplex S32760 Product Specifications
- Super Duplex S32760 Flange Dimensions
| Grade | Type | Unified Numbering System (UNS) | Forgings Grades | Werkstoff-nr. | Euronorm | AFNOR | DIN Standards | |
|---|---|---|---|---|---|---|---|---|
| No. | Name | |||||||
| Zeron 100 | Super Duplex | S32760 | F55 | 1.4501 | en 1.4501 | X2CrNiMoCuWN25-7-4 | Z3CNDUW25-07Az | din 1.4501 |
| Material Specification | Form | Raw Material | Specification | Dimension Standard |
|---|---|---|---|---|
| Super Duplex S32760 Flanges | Long weld-neck flange, Plate flange, Blind flange, Slip-on flange, Large diameter flange, Spectacle blind flange, Square flange, Orifice flange, Lap-joint flange, Threaded flange, Socket-weld flange, Weld-neck flange | Super Duplex steel round bar | ASTM A182 F55 / ASME A182 F55 UNS S32760 | ASME B 16.5 / B 16.47 AISI B16.5 / B16.47 |
| Flat Face (FF) Flanges | ||||
| Male-Female (M/F) Face Flanges | ||||
| Tongue-Groove (T/G) Face Flanges | ||||
| Raised Face (RF) Flanges | ||||
| Ring Type Joint (RTJ) Flanges |
| Dimensional Standard | Size Range | Rating |
|---|---|---|
| ASME B16.5 / ANSI B16.5 / API 590 | ½” to 24” | Class 150 to 2500 Lbs |
| ASME B 16.48 / ANSI B 16.48 | 24” to 60” | Class 150 to 900 Lbs |
| DIN | DN10 to DN3600 | PN6 to PN160 |
| ASME / ANSI B16.36 | 1” to 24” | Class 300 to 2500 Lbs |
| ASME B16.47 / ASME B 16.48 /API 605 | 26” to 60” | - |
| BS 3293 | 26” to 48” | Class 150 to 600 Lbs |
| API 6A | 2 1/16” to 30” | 2000 Psi to 20000 Psi |
Characteristics of Duplex UNS S32760
- High Resistance to uniform corrosion.
- High Resistance to pitting & crevice corrosion.
- High Resistance to stress corrosion cracking & corrosion fatigue
- High mechanical strength
- High Resistance to abrasion & erosion
- High Resistance to Fatigue
- High energy absorption
- Low thermal expansion
- Good weld ability with care in thick sections
- Useful up to 600°F
Applications of Super Duplex UNS S32760
- Chemical Processing Industry – Transport and Storage, pressure vessels, tanks, piping, and heat exchangers.
- Oil and Gas exploration and processing equipment – piping, tubing, and heat exchangers
- Marine Industry and Seawater systems – Cargo Tanks for Ships, High chloride environments,
- FGD / Effluent Scrubber Systems.
- Paper and Pulp Industry Digesters, Bleaching equipment and Stock-Handling Systems, Chip Pre-steaming vessels.
- Food Processing Equipment.
- Flue gas desulfurization / cleaning equipment
- Rotors, fans, shafts, and press rolls requiring combined strength and corrosion resistance
- Biofuels Plant, Desalination plants
- Firewalls and blast walls on offshore platforms
- Super Duplex 2507 UNS S32760 Chemical Composition
- Super Duplex 2507 UNS S32760 Mechanical Properties
- Super Duplex 2507 UNS S32760 Physical Properties
| Elements | Carbon | Chromium | Manganese | Molybdenum | Nickel | Nitrogen | Phosphorus | Silicon | Sulphur | Tungsten |
|---|---|---|---|---|---|---|---|---|---|---|
| UNS S32760 | 0.03 max | 24.0-26.0 | 1.0 max | 3.0-4.0 | 6.0-8.0 | 0.2-0.3 | 0.03 max | 1.0 max | 0.01 max | 0.5-1.0 |
| 0.2% Proof Stress (N/mm2 ) [ksi] minimum | 550[79.8] |
| Tensile Strength (N/mm2) [ksi] minimum | 750 [116] |
| Elongation (%) minimum | 25 |
| Hardness (HBN) | 270 max |
| Reduction of Cross Section Area (%) | 45 |
| Density (Kg.m-1) | 7810 |
| Magnetic Permeability | 33 |
| Young’s Modulus (N/mm2) | 199 x 103 |
| Specific Heat, 20°C (J.Kg-1.°K-1) | 475 |
| Fracture Toughness, Kq (MPa.m) | 98 |
| Specific Electrical Resistance, 20°C (µO.m) | 0.80 |
| Thermal conductivity, 20°C | 14.2 |
| Mean coefficient of thermal expansion | 11.1 x 10-6 |
Looking for some more information ?
Get Best Quotes or Send us your Requirement
Documents
- Commercial Invoice including HS Code
- Packing List including number of boxes, net weight, gross weight, Marks & Numbers
- Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
- Material Test Certificates as per EN 10204 3.1, EN 10204 3.2
- Test Certificates certifying NACE MR0103, NACE MR0175
Testings
- Positive Material Identification – PMI Testing
- Chemical Analysis – Spectro Analysis
- Mechanical Testing Such as Tensile, Elongation, Reduction of Area
- Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
- Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Packaging
The different ways in which our products are packed are:
- Shrink-wrapped
- Wooden Boxes
- Wooden Pallets
- Wooden Crates
- Carton boxes
Marking
We mark Duplex 2205 as needed with the most suitable & visible marking techniques. Standard Marking System :-
- Manufacturer’s Name or Trademark
- Material Designation
- Size Designation
- Rating Designation
- Melt Designation
- Marking for Identification
Leading Supplier, Manufacturer Exporter
More than 30 years of Experiance
Mill Test Report Provided
In Accordance with EN10204 NACE 3.1, NACE 3.2
Fast Delivery
Warehouse near to Airport & Port.
Efficient & Cost Effective Shipping Services
We Offer EXW – Ex Works, FOB, CFR, CIF, DDU, etc.
Inspection
3rd Party Inspection is Carried out
ISO 9001:2008 Certified
Quality Product
Transparent client dealing, No False Assurance, 100% Fulfillment of Commitments.
Worldwide Exporter
Export to more than 70 Countries Worldwide
Best Price
Competitive pricing is offered