Duplex 2205 Flange | Duplex 2205 Stainless Steel Flange | ASTM A182 F51 | ASTM A182 F60 | UNS S32205 | UNS S31803 | Duplex Flange Suppliers | Duplex Flange Manufacturers
Duplex 2205 Flange | Duplex 2205 Slip-On Reducing Flange | Duplex 2205 Weld Neck Reducing Flange | Duplex 2205 Flat Face Weld Neck Flange | Duplex 2205 Girth Flange | Duplex 2205 Tongue And Groove Flange | Duplex 2205 Blind Flange | Duplex 2205 Lap Joint Flange
Hex Tubes Inc a leading manufacturer, exporter, and supplier of Duplex 2205 Stainless Steel Flange with ASTM A182 F51 & ASTM A182 F60. Hex Tubes Inc offers a complete range of Duplex Stainless Steel Flange (A182 F51 / A182 F60 / DIN 2633 / DIN 2635) such as Blind Flange, Blind Flange Raised Face, Hub Blind Flange, Spectacle Blind Flange, Slip On Flange, Slip On Raised Face Flange, Slip On Flat Face Flange, Raised Face Slip On Flange, Lap Joint Flange, Flat Face Weld Neck Flange, Reducing Weld Neck Flange, Weld Neck Flange, Weld Neck Raised Flange, Threaded Flange, Socket Weld Flange, Socket Weld Raised Face Flange, Neck Weld Flange, Stainless Steel Threaded Flange, Raised Face Weld Neck Flange, Reducing Flange, Flat Face Flange, Flat Face Slip-On Flange, Flat Face Weld Neck Flange, Ring Joint Flange, Long Weld Neck Flange, Raised Face Flange, Orifice Flange, Spectacle Flange. Hex Tubes Inc are one of the leading 2205 Duplex Flange Manufacturer who can weld Duplex 2205 Flange in various sizes and dimensions. They have special quality finishing and duress for long life, high pressure, and zero defects.
All Duplex 2205 Flanges (UNS S31803 / S32205) are offered with NACE 3.1 Certification, Mill Test Certificates, and ISO 17025 Standards by a Government of India approved Laboratory. Positive Material Identification is done on all raw material procured at Hex Tubes Inc. Duplex Steel 2205 Flange (ASTM A182 / ANSI B16.5) can be manufactured and supplied in a variety of sizes and pressure ratings to meet project specific requirements of our customers. Duplex Stainless Steel Flange is used in Petro-Chemical Industry, Oil and Gas Industry, Nuclear Industry, Pulp & Paper Industry, Research & Development, Mega Projects & Defense & Development Industries.
Duplex 2205 Stainless Steel Flange Specification:-
Specifications: ASTM A182, ASME SA182, F51, F60, ANSI B16.5, ANSI B16.47, ANSI B16.48 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings, ASME B16.5, ASME B16.47.
Dimensions: DIN (DIN 2633 / DIN 2635), ASTM, BS and all International Standards.
Size: ½” (15 NB) to 48″ (1200NB).
Grade: EN 1.4462, UNS S31803, UNS S32205.
Pressure Rating: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.
Our Duplex Stainless Steel (UNS S31803 / UNS S32205) Flanges conforms to NACE MR0175/ISO 15156.
Duplex Flanges · Duplex Stainless Steel 2205 Flange · Duplex Flanges Manufacturer · Duplex 2205 Flanges · 2205 Duplex Stainless Steel Flange · Duplex Stainless Steel Flanges · 2205 Duplex Flanges · Duplex Flange Supplier · Duplex Steel Flanges · Duplex Steel 2205 Flanges · ASTM A182 F51 · ASTM A182 F60 · Weld Neck Flange · Slip On Flange · Socket Weld Flange · Lap Joint Flange · Spectacle Flange · Threaded Flange · Orifice Flange · Blind Flange · Long Neck Flange · Flat Face Flange · Reducing Flange· Raised Face Flange.
Types of Duplex 2205 Flange
- Duplex 2205 Weld Neck Reducing Flange
- Duplex 2205 Flat Face Weld Neck Flange
- Duplex 2205 Neck Weld Flange
- Duplex 2205 Weld Neck Flange Raised Face
- Duplex 2205 Weld Neck Flange
- Duplex 2205 Raised Face Weld Neck Flange
- Duplex 2205 Lapped Flange
- Duplex 2205 Raised Face Flange
- Duplex 2205 Tongue And Groove Flange
- Duplex 2205 Slip Flange
- Duplex 2205 Reducing Weld Neck Flange
- Duplex 2205 Stainless Steel Threaded Flange
- Duplex 2205 Flange
- Duplex 2205 Hub Blind Flange
- Duplex 2205 Blind Flange
- Duplex 2205 Flange Slip-On
- Duplex 2205 Slip-On Raised Face Flange
- Duplex 2205 Slip-On Reducing Flange
- Duplex 2205 Socket Weld Flange
- Duplex 2205 Lap Joint Flange
- Duplex 2205 Threaded Flange
- Duplex 2205 Flat Face Flange
- Duplex 2205 Spectacle Flange
- Duplex 2205 Orifice Flange
- Duplex 2205 Long Neck Flanges
- Duplex 2205 Reducing Flange
Weld Neck Flange (WN Flange)
1. Weld Neck Flange 2. Butt Weld 3. Pipe or Fitting
Duplex 2205 Weld Neck Flange
Duplex 2205 Weld Neck Flange (WN Flange) are easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting. The long tapered hub provides an important reinforcement for use in several applications involving high pressure, sub-zero and/or elevated temperatures. The smooth transition from flange thickness to pipe or fitting wall thickness affected by the taper is extremely beneficial, under conditions of repeated bending, caused by line expansion or other variable forces.
Duplex 2205 Slip On Flange
The calculated strength from a Duplex 2205 Stainless Steel Slip-On flange (SO Flange) under internal pressure is of the order of two-thirds that of Welding Neck flanges, and their life under fatigue is about one-third that of the latter. The connection with the pipe is done with 2 fillet welds, as well at the outside as also at the inside of the flange. The X measure on the image is approximately Wall thickness of pipe + 3 mm. This space is necessary, to do not damage the flange face, during the welding process.
Duplex 2205 Slip On Flange (SO Flange)
1. Slip On flange 2. Filled weld outside 3. Filled weld inside 4. Pipe
Duplex 2205 Socket Weld Flange (SW Flange)
1. Socket Weld flange 2. Filled weld 3. Pipe X = Expansion gap
Duplex 2205 Socket Weld Flange
Duplex 2205 Socket Weld flange was initially developed for use on small-size high-pressure piping. Their static strength is equal to Slip On flanges, but their fatigue strength 50% greater than double-welded Slip On flanges. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, some space must be created between flange or fitting and pipe. ASME B31.1 1998 127.3.
Duplex 2205 Lap Joint Flange
Lap Joint Flanges (LJ Flanges) have all the same common dimensions as any other flange named on this page however it does not have a raised face, they used in conjunction with a “Lap Joint Stub End”. These flanges are nearly identical to a Slip-On flange with the exception of a radius at the intersection of the flange face and the bore to accommodate the flanged portion of the Stub End.
UNS S32205 / UNS S31803 Lap Joint Flange (LJ Flange)
1. Lap Joint flange 2. Stub End 3. Butt weld 4. Pipe or Fitting
Duplex Steel 2205 Threaded Flange
1. Threaded flange 2. Thread 3. Pipe or Fitting
Duplex 2205 Threaded Flange
Duplex 2205 Threaded Flange are used for special circumstances with their main advantage being that they can be attached to the pipe without welding. Sometimes a seal weld is also used in conjunction with the threaded connection. Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller pipe sizes. A threaded flange or fitting is not suitable for a pipe system with thin wall thickness, because cutting threads on a pipe is not possible.
Duplex 2205 Blind Flange
Duplex 2205 Blind Flange are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings. From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed flange types.
2205 Duplex Blind Flange (BL Flange)
UNS S32205 Flat Face Flange (FF Flange)
Duplex 2205 Flat Face Flange
Duplex 2205 Flat Face Flange (FF Flange) has a gasket surface in the same plane as the bolting circle face. Applications using flat face flanges are frequently those in which the mating flange or flanged fitting is made from a casting. These pipe flanges are used when the counter-flanges are flat-face. Duplex 2205 Stainless Steel Flat Face Flange mainly used for connecting to cast iron equipment, valves, and specialties. This flat face flange has a gasket surface in the same plane as the bolting circle face. Flat face flanges are never to be bolted to a raised face flange.
Duplex 2205 Raised Face Flange
Duplex 2205 Raised Face flange is the most commonly used flanges. The raised face thickness of 150# and 300# are included in the specified flange thickness and for the higher rating, they are not included in the flange thickness. The Raised Face (RF) type is the most applied flange and is easy to identify. It is referred to as a raised face because the gasket surfaces are raised above the bolting circle face.
UNS S31803 Raised Face Flange (RF Flange)
Duplex Stainless Steel Tongue And Groove Flange
Duplex 2205 Tongue And Groove Flange
The Tongue And Groove faces of these flanges must be matched. One flange face has a raised ring (Tongue) machined onto the flange face while the mating flange has a matching depression (Groove) machined into the face. Tongue And Groove facings are standardized in both large and small types. Tongue And Groove Flange differ from male-and-female in that the inside diameters of the tongue-and-groove do not extend into the flange base, thus retaining the gasket on its inner and outer diameter.
Duplex 2205 Ring Type Joint Flange
These pipe flanges are much reliable type of flange joint but are costlier than the other type of flanges. The Ring Type Joint flanges are generally used in high pressure (Class 600 and higher rating) and/or high-temperature services above 800°F (427°C). A flange is a forged or cast ring of steel designed to connect sections of pipe or join pipe to a pressure Vessel, pump or any other integral flanges assembly.
Duplex 2205 Ring Type Joint (RTJ) Flange
Duplex SS 2205 Spectacle Flanges
Duplex 2205 Spectacle Flange
This is a pressure retaining plate with one solid end and one open end connected with a web or tie-bar. In normal operation, the open end forms the seal between two flanges and permits normal flow of fluid through pipe work. If the solid end is swung into position it effectively blanks of the pipe and halts the flow.
Duplex 2205 Orifice Flanges
Duplex 2205 orifice flange is clamped between a pair of flanges when installing in a line and the whole assembly is referred to as an orifice flange union. Jack-screws within the assembly to facilitate removal of the orifice plate. The orifice plate, the metering device, consists of a thin plate with a concentric, square edge, circular hole in the center. Two pressure tap-holes are drilled in each flange to measure pressure difference through the orifice. Orifice flanges are used in place of standard flanges to allow an orifice meter to be installed on the flange. Orifice plate carriers are designed into the flanges for fitting meter connections.
Duplex UNS S32205 Orifice Flanges
Stainless Steel Duplex Long Neck Flanges
Duplex 2205 Long Neck Flange
Owing to our rich industrial experience, we are offering a comprehensive range of Long Weld Neck Flanges. The professionals of our organization source these neck flanges from trusted vendors. These flanges are unique due to their simple connectivity with other pipes. Moreover, our products are extensively used in refining industries for linking purposes. Our esteemed patrons can avail these qualitative range of flanges from us at industry-leading prices.
Duplex 2205 Reducing Flange
Duplex 2205 Reducing Flanges are used in place of standard flanges to allow for a change in pipe size. The flange consists of one specified diameter with a smaller diameter bore size. Except for the bore and hub dimensions, a reducing flange has dimensions of the larger pipe size. Welding neck, slip-on, and threaded flanges can be reducers, and are considered an economical means to make a pipe size transition. Reducing Slip On Flange, Reducing Weld Neck Flange.
Duplex Reducing Flange
Duplex Flanges:-
- Duplex Flange Suppliers
- Duplex Flange Manufacturers
- Duplex Flange Stockist
- Duplex Flange Exporters
- Duplex 2205 Flange Suppliers
- Duplex 2205 Flange Manufacturers
- Duplex 2205 Flange Stockist
- Duplex 2205 Flange Exporters
- UNS S32205 Flange Suppliers
- UNS S32205 Flange Manufacturers
- UNS S32205 Flange Stockist
- UNS S32205 Flange Exporters
- UNS S31803 Flange Suppliers
- UNS S31803 Flange Manufacturers
- UNS S31803 Flange Stockist
- UNS S31803 Flange Exporters
| Grade | Type | Unified Numbering System (UNS) | Forgings Grades | Werkstoff-nr. | Euronorm | AFNOR | DIN Standards | |
|---|---|---|---|---|---|---|---|---|
| No. | Name | |||||||
| 2205 | Standard Duplex | S31803 / S32205 | F51 / F60 | 1.4462 | en 1.4462 | X2CrNiMoN22-5-3 | Z2.CND22.05.03 | din 1.4462 |
| Pipe | Tube | Sheet Plate | Bar | Flanges, Fittings, Valves | ||
|---|---|---|---|---|---|---|
| Seamless Pipe | Welded Pipe | Seamless Tube | Welded Tube | - | - | - |
| ASTM A790 | ASTM A790 | ASTM A789 | ASTM A789 | ASTM A240 | ASTM A276 | ASTM A182/ ASTM A403/ ASTM A815/ ASTM 473 |
Duplex 2205 Flange Supplier | Duplex 2205 Flange Manufacturer | Duplex 2205 Flange Stockist | Duplex 2205 Flange Exporter
Hex Tubes Inc is a global supplier of Duplex Flange Suppliers in India, Duplex Flange Suppliers in UAE, Duplex Flange Suppliers in Abu Dhabi, Duplex Flange Suppliers in Dubai, Duplex Flange Suppliers in UK, Duplex Flange Suppliers in England, Duplex Flange Suppliers in London, Duplex Flange Suppliers in US, Duplex Flange Suppliers in California, Duplex Flange Suppliers in Texas, Duplex Flange Suppliers in New York, Duplex Flange Suppliers in Georgia, Duplex Flange Suppliers in New Jersey, Duplex Flange Suppliers in Australia, Duplex Flange Suppliers in Brazil, Duplex Flange Suppliers in Canada, Duplex Flange Suppliers in France, Duplex Flange Suppliers in Germany, Duplex Flange Suppliers in Greece, Duplex Flange Suppliers in Indonesia, Duplex Flange Suppliers in Italy, Duplex Flange Suppliers in Malaysia, Duplex Flange Suppliers in Netherland, Duplex Flange Suppliers in Philippines, Duplex Flange Suppliers in Russia, Duplex Flange Suppliers in Saudi Arabia, Duplex Flange Suppliers in Singapore, Duplex Flange Suppliers in South Africa, Duplex Flange Suppliers in South Korea, Duplex Flange Suppliers in Spain, Duplex Flange Suppliers in Sweden, Duplex Flange Suppliers in Thailand, Duplex Flange Suppliers in Ukraine.
Characteristics of Duplex 2205 Flange
- High Resistance to uniform corrosion.
- High Resistance to pitting & crevice corrosion.
- High Resistance to stress corrosion cracking & corrosion fatigue
- High mechanical strength
- High Resistance to abrasion & erosion
- High Resistance to Fatigue
- High energy absorption
- Low thermal expansion
- Good weld ability with care in thick sections
- Useful up to 600°F
Applications of 2205 Duplex Flange
- Chemical Processing Industry – Transport and Storage, pressure vessels, tanks, piping, and heat exchangers.
- Oil and Gas exploration and processing equipment – piping, tubing, and heat exchangers
- Marine Industry and Seawater systems – Cargo Tanks for Ships, High chloride environments,
- FGD / Effluent Scrubber Systems.
- Paper and Pulp Industry Digesters, Bleaching equipment and Stock-Handling Systems, Chip Pre-steaming vessels.
- Food Processing Equipment.
- Flue gas desulfurization / cleaning equipment
- Rotors, fans, shafts, and press rolls requiring combined strength and corrosion resistance
- Biofuels Plant, Desalination plants
- Firewalls and blast walls on offshore platforms
| Elements | Carbon (C) | Chromium (Cr) | Manganese (Mn) | Molybdenum (Mo) | Nickel (Ni) | Nitrogen (N) | Phosphorus (P) | Silicon (Si) | Sulphur (S) | Iron / Ferrum (Fe) |
|---|---|---|---|---|---|---|---|---|---|---|
| UNS S32205 | 0.30 max | 22.0-23.0 | 2.00 | 3.00-3.50 | 4.50-6.50 | 0.14-0.20 | 0.030 | 1.0 | 0.020 | Balance |
| UNS S31803 | 0.30 max | 21.0-23.0 | 2.00 | 2.50-3.50 | 4.50-6.50 | 0.08-0.20 | 0.030 | 1.0 | 0.020 | Balance |
| Tensile Strength (Mpa) min | Yield Strength 0.2% Proof (Mpa) min | Elongation % (% in 50mm) | Hardness (Brinell) | Hardness Rockwell C |
|---|---|---|---|---|
| 621 | 448 | 25 min | 293 max | 31 max |
| Density (Kg.m-1) | 7810 |
| Magnetic Permeability | <50 |
| Young’s Modulus (N/mm2) | 190 x 10^3 |
| Specific Heat, 20°C (J.Kg-1.°K-1) | 400 |
| Specific Electrical Resistance, 20°C (µO.m) | 0.85 |
| Thermal conductivity, 20°C | 15 |
| Mean coefficient of thermal expansion | 11 x 10^-6 |
Looking for some more information ?
Get Best Quotes or Send us your Requirement
Documents
- Commercial Invoice including HS Code
- Packing List including number of boxes, net weight, gross weight, Marks & Numbers
- Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
- Material Test Certificates as per EN 10204 3.1, EN 10204 3.2
- Test Certificates certifying NACE MR0103, NACE MR0175
Testings
- Positive Material Identification – PMI Testing
- Chemical Analysis – Spectro Analysis
- Mechanical Testing Such as Tensile, Elongation, Reduction of Area
- Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
- Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Packaging
The different ways in which our products are packed are:
- Shrink-wrapped
- Wooden Boxes
- Wooden Pallets
- Wooden Crates
- Carton boxes
Marking
We mark Duplex 2205 as needed with the most suitable & visible marking techniques. Standard Marking System :-
- Manufacturer’s Name or Trademark
- Material Designation
- Size Designation
- Rating Designation
- Melt Designation
- Marking for Identification