Duplex 2205 Stainless Steel UNS S31803 | UNS S32205
Duplex 2205 Stainless Steel Supplier | Duplex 2205 Stainless Steel Manufacturer | Duplex 2205 Stainless Steel Exporter
What Is Duplex 2205 Stainless Steel?
Duplex 2205 (EN 1.4462) also known as Duplex 2205 Stainless Steel, URANUS 45N, FALC223 with UNS S31803 and UNS S32205 is a two-phase corroded metal, ferritic and austenitic steel with 22% chromium (22Cr Duplex) 3% molybdenum, 5 to 6% nickel alloyed stainless steel also known as x2crnimon22-5-3 used extensively in applications that require good corrosion resistance & strength. Duplex 2205 (UNS S31803 / UNS S32205) also known as 1.4462 Duplex is a non-standard and popular grade of Stainless Steel. Thus, Duplex 2205 must be procured only from trusted vendors like Hex Tubes Inc. Duplex 2205 also is known as Sandvik SAF 2205 / SAF 2205 is a Sandvik-owned trademark. FALC 223 is a trademark of KRUPP STAHL AKTIENGESELLSCHAFT.
Duplex 2205 Stainless Steel Composition
Duplex 2205 is a typical composition of 22% Chromium and 5% Nickel. 2205 Duplex Stainless Steel is a cheaper alternative to high nickel-based alloys due to low nickel composition.
Duplex Stainless Steel Grades |
||||
| Grade | Other Name | EN / WNR | UNS | Duplex Type |
| 2205 | Duplex 2205 | 1.4462 | UNS S31803 | Standard Duplex |
| UNS S32205 | ||||
| 2507 | Super Duplex 2507 | 1.4410 | UNS S32750 | Super Duplex |
| Zeron | Zeron 100 / Super Duplex | 1.4501 | UNS S32760 | Super Duplex |
Duplex 2205 Stainless Steel (1.4462) corrosion resistance is superior to Grade 316 in most environments. Heat treatment of Duplex SS 2205 is solution treatment (annealing), between 1020 – 1100°C, followed by rapid cooling. 2205 Duplex Stainless Steel (2205 Duplex) cannot be hardened by heat treatment. They can, however, be work hardened. The Duplex SS (Duplex 2205) stainless steel has undergone a number of modifications resulting in S32205 (Duplex 2205). 2205 Stainless Steel (Duplex Stainless Steel) offer higher resistance to corrosion. Duplex Steel (2205 Duplex) cannot be hardened by thermal methods. The density of Duplex SS is 7.805 g/cm³. Duplex Stainless Steel (2205 Duplex) Hardness is Max 31 HRC.
Duplex 2205 Stainless Steel Microstructure
The Microstructure of Duplex 2205 Stainless Steel (1.4462) shall be examined after solution heat treatment at a minimum of 400X magnification, and verified to be free from grain boundary particles (carbides, nitrides) and intermetallic phases (sigma, chi and laves), as defined by ASTM A923 Method A. A photomicrograph (x400) can be provided if requested. Machining Duplex Stainless Steel is low due to its high strength. The cutting speeds are almost 20% lower than that of grade 304. PREN number for 22 Cr Duplex Stainless Steel is between 35-40.
Duplex 2205 Welding
Duplex 2205 stainless steel has good weldability. Duplex Stainless Steel Welding Procedure includes all standard welding processes like Shielded metal arc welding (SMAW), Gas tungsten arc welding TIG (GTAW), Gas metal arc welding MIG (GMAW), Flux-cored arc welding (FCW), Plasma arc welding (PAW), Submerged arc welding (SAW), Laser welding, Resistance welding, High-frequency welding, etc. Duplex 2205 is very hard and difficult to manufacture.
Hex Tubes Inc is one of the leading Supplier, and Manufacturer of Duplex 2205 to various heavy executive industries in India and Abroad. Hex Tubes Inc have grown efficiently in the field of Industrial Supplies offering a wide range of Duplex 2205 in forms like Duplex 2205 Pipes (ASTM A790),Duplex 2205 Tubes (ASTM A789), Duplex 2205 Flanges (ASTM A182 F51 / ASTM A182 F60), Duplex 2205 Fasteners, Duplex 2205 Pipe Fittings (ASTM A403 / ASTM A815), Duplex 2205 Tube Fittings, Duplex 2205 Forged Fittings (ASTM A182 / ASTM A473), Duplex 2205 Sheet / Plate (ASTM A240), Duplex 2205 Wire Mesh and Duplex 2205 Round Bar (ASTM A276 / ASTM A479).
Duplex 2205 Stainless Steel Products
Duplex 2205 Stainless Steel Pipe
- Duplex 2205 Stainless Steel Seamless Pipe
- Duplex 2205 Stainless Steel Welded Pipe
Duplex 2205 Stainless Steel Tube
- Duplex 2205 Stainless Steel Seamless Tube
- Duplex 2205 Stainless Steel Welded Tube
Duplex 2205 Stainless Steel Bar
- Duplex 2205 Steel Bar
- Duplex 2205 Stainless Steel Square Bar
- Duplex 2205 Stainless Steel Hex Bar (Hexagon Bar)
- Duplex 2205 Stainless Steel Flat Bar
- Duplex 2205 Stainless Steel Round Bar
- Duplex 2205 Stainless Steel Threaded Bar
- Duplex 2205 Stainless Steel Hollow Bar
Duplex 2205 Stainless Steel Wire Mesh
- Duplex 2205 Stainless Steel Wire
- Duplex 2205 Stainless Steel Wire Mesh
Duplex 2205 Stainless Steel Flanges
- Duplex 2205 Stainless Steel Blind Flange
- Duplex 2205 Stainless Steel Slip On Flange
- Duplex 2205 Stainless Steel Lap Joint Flange
- Duplex 2205 Stainless Steel Weld Neck Flange
- Duplex 2205 Stainless Steel Threaded Flange
- Duplex 2205 Stainless Steel Socket Weld Flange
Duplex 2205 Stainless Steel Sheet Plate
- Duplex 2205 Stainless Steel Sheet
- Duplex 2205 Stainless Steel Plate
Duplex 2205 Stainless Steel Fasteners
- Duplex 2205 Stainless Steel Bolts
- Duplex 2205 Stainless Steel Screw
- Duplex 2205 Stainless Steel Nuts
- Duplex 2205 Stainless Steel Washer
Duplex 2205 Stainless Steel Forged Fittings
- Duplex 2205 Stainless Steel Socket Weld Fittings
- Duplex 2205 Stainless Steel Threaded Fittings
Duplex 2205 Stainless Steel Pipe Fittings / Buttweld Fittings
- Duplex 2205 Stainless Steel Elbow
- Duplex 2205 Stainless Steel Tee
- Duplex 2205 Stainless Steel Reducer
- Duplex 2205 Stainless Steel Couplings
- Duplex 2205 Stainless Steel Stub Ends
- Duplex 2205 Stainless Steel Cross
- Duplex 2205 Stainless Steel Pipe Bends
- Duplex 2205 Stainless Steel Pipe Nipples
Duplex 2205 Stainless Steel Compression Tube Fittings
- Duplex 2205 Stainless Steel Union
- Duplex 2205 Stainless Steel Connector
- Duplex 2205 Stainless Steel Elbow
- Duplex 2205 Stainless Steel Tee
- Duplex 2205 Stainless Steel Adapter
- Duplex 2205 Stainless Steel End Reducer
- Duplex 2205 Stainless Steel Plug
- Duplex 2205 Stainless Steel Cap
- Duplex 2205 Stainless Steel Nut
- Duplex 2205 Stainless Steel Ferrule
| Grade | Type | Unified Numbering System (UNS) | Forgings Grades | Werkstoff-nr. | Euronorm | AFNOR | DIN Standards | |
|---|---|---|---|---|---|---|---|---|
| No. | Name | |||||||
| 2205 | Standard Duplex | S31803 / S32205 | F51 / F60 | 1.4462 | en 1.4462 | X2CrNiMoN22-5-3 | Z2.CND22.05.03 | din 1.4462 |
| Pipe | Tube | Sheet Plate | Bar | Flanges, Fittings, Valves | ||
|---|---|---|---|---|---|---|
| Seamless Pipe | Welded Pipe | Seamless Tube | Welded Tube | - | - | - |
| ASTM A790 | ASTM A790 | ASTM A789 | ASTM A789 | ASTM A240 | ASTM A276 | ASTM A182/ ASTM A403/ ASTM A815/ ASTM 473 |
Duplex 2205 Stainless Steel Properties
- Grade 2205 Duplex is Highly Resistant to uniform corrosion, pitting & crevice corrosion, stress corrosion cracking & corrosion fatigue, abrasion & erosion.
- High mechanical strength.
- High energy absorption
- Low thermal expansion
- Good weld ability with care in thick sections
- Grade 2205 Duplex is useful up to 600°F
Duplex 2205 Stainless Steel Applications
- Chemical Processing Industry – Transport and Storage, pressure vessels, tanks, piping, and heat exchangers.
- Oil and Gas exploration and processing equipment – piping, tubing, and heat exchangers
- Marine Industry and Seawater systems – Cargo Tanks for Ships, High chloride environments,
- FGD / Effluent Scrubber Systems.
- Paper and Pulp Industry Digesters, Bleaching equipment and Stock-Handling Systems, Chip Pre-steaming vessels.
- Food Processing Equipment.
- Flue gas desulfurization / cleaning equipment
- Rotors, fans, shafts, and press rolls requiring combined strength and corrosion resistance
- Biofuels Plant, Desalination plants
- Firewalls and blast walls on offshore platforms
| Elements | Carbon (C) | Chromium (Cr) | Manganese (Mn) | Molybdenum (Mo) | Nickel (Ni) | Nitrogen (N) | Phosphorus (P) | Silicon (Si) | Sulphur (S) | Iron / Ferrum (Fe) |
|---|---|---|---|---|---|---|---|---|---|---|
| UNS S32205 | 0.30 max | 22.0-23.0 | 2.00 | 3.00-3.50 | 4.50-6.50 | 0.14-0.20 | 0.030 | 1.0 | 0.020 | Balance |
| UNS S31803 | 0.30 max | 21.0-23.0 | 2.00 | 2.50-3.50 | 4.50-6.50 | 0.08-0.20 | 0.030 | 1.0 | 0.020 | Balance |
| Tensile Strength (Mpa) min | Yield Strength 0.2% Proof (Mpa) min | Elongation % (% in 50mm) | Hardness (Brinell) | Hardness Rockwell C |
|---|---|---|---|---|
| 621 | 448 | 25 min | 293 max | 31 max |
| Density (Kg.m-1) | 7810 |
| Magnetic Permeability | <50 |
| Young’s Modulus (N/mm2) | 190 x 10^3 |
| Specific Heat, 20°C (J.Kg-1.°K-1) | 400 |
| Specific Electrical Resistance, 20°C (µO.m) | 0.85 |
| Thermal conductivity, 20°C | 15 |
| Mean coefficient of thermal expansion | 11 x 10^-6 |
Looking for some more information ?
Get Best Quotes or Send us your Requirement
Documents
- Commercial Invoice including HS Code
- Packing List including number of boxes, net weight, gross weight, Marks & Numbers
- Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
- Material Test Certificates as per EN 10204 3.1, EN 10204 3.2
- Test Certificates certifying NACE MR0103, NACE MR0175
Testings
- Positive Material Identification – PMI Testing
- Chemical Analysis – Spectro Analysis
- Mechanical Testing Such as Tensile, Elongation, Reduction of Area
- Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
- Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Packaging
The different ways in which our products are packed are:
- Shrink-wrapped
- Wooden Boxes
- Wooden Pallets
- Wooden Crates
- Carton boxes
Marking
We mark Duplex 2205 as needed with the most suitable & visible marking techniques. Standard Marking System :-
- Manufacturer’s Name or Trademark
- Material Designation
- Size Designation
- Rating Designation
- Melt Designation
- Marking for Identification